|
|
 |
|
|
|
| |
Antioxidants
D407A - 50% Ball Milled
Dispersion of Santowhite
Powder
Total solids content % 5l - 55
pH 9.8-11.2
Viscosity (Brookfield #2@30) cps l50 - 500
Weight per gallon (lbs) 8.7
All ingredients of this mixture are included in
the T.S.C.A. listing of chemicals.
|
Top of
Page
Antiwebbing
00M125 - Antiweb
M125 is a superior antiwebbing agent which is homogenized.
M125 has had proven industrial usage in dipping and coating
compounds. It can be added directly to a dipping compound
or diluted and sprayed as a mist over the surface of the dip tank
as the forms are emerging. Optimum results are obtained by
use of .2-1.6 wet weight on wet weight of latex compound.
Total solids content ( % ) 46 - 50
Weight per gallon (lbs) 7.80
pH 8.0 - 9.5
Color white
Storage Stability excellent
Viscosity (Brookfield #3@6) cps 5,000 - 10,000
All ingredients of M125 are considered acceptable under
21 CFR 177.2600 (Rubber articles intended for repeated use).
M125 is chemically acceptable for use in articles which will
be used in producing, manufacturing, packing, processing,
packaging, or holding food, subject to the provisions of
21 CFR 176.170.
|
Top of
Page
Fire Retardant
Dispersions
0D746A
Total Solids Content % 67.7 - 68.7
pH 10 - 11
Viscosity (Brookfield #3@12) cps 1000 - 2000
Weight per Gallon (lbs) 16.0
0M132A - Fire Retardant
Plasticizer
Emulsion
M-132A is an aqueous emulsion of a tetrabromophthalate ester
which acts as a flame retardant plasticizer for PVC, acrylic and
other polymeric latex compounds and coatings. M-132A offers
the following advantages:
- High flame-retardant efficiency
- Good plasticizing activity
- Excellent thermal stability
- Compatible with other plasticizer emulsions
PROPERTIES:
Active solids (%) 74 - 78
pH 9 - 10
Weight per gallon (lbs) 11.00
APPLICATIONS:
M-132A is recommended as a flame retardant additive for
coatings such as drapery and upholstery backcoatings. It
also is useful in various other coated fabrics which require
flame-retardancy. In order to maximize its effeciency, the
use of a small amount of an antimony oxide synergist is
recommended. Where the use of an antimony oxide is
undesirable, higher levels of M-132A can be used to achieve
the desired level of flame retardancy.
|
Top of
Page
Medical
Goods
LTX 001119 - Condom Dipping
Compound
Type: Natural Rubber Latex - Two part system
Curing Masterbatch: D321
DIRECTIONS: For Condom Dipping - no coagulant
(1) Add 4.6 gms D321 Curing Masterbatch per 1000 gms 1119.
Mix thoroughly - age at least overnight before use.
(2) Dilute with ammoniated water to about 50% solids and deaerate.
(3) Using glass form, dip, and dry; redip, dry, and cure
10-15 minutes at 240° - 250°F. Latex tank normally
cooled to maintain about 80°F in liquid.
(4) Lower levels of D321 can be used for other balloon products.
Suggest 3.0 grams D321 per 1000 grams 1119. Develop full
precure before dipping.
LTX 001438 - Catheter Balloon
Dipping
Compound
Type: Natural Rubber Latex - Two part system
Curing Masterbatch: D710
COMPOUND PHYSICALS:
Total Solids % 56 - 60
pH 11 - 12
Viscosity (Brookfield #1@30) cps 50 - 100
Mech. Stability (seconds) 360+
Weight per Gallon (lbs) 8.0
FILM PHYSICALS: (Dependent on degree of cure)
Tensile Strength (psi) 4000+
Elongation (%) 800+
Modulus @ 300 (psi) approx. 200
Modulus @ 500 (psi) approx. 500
Modulus @ 700 (psi) approx. 1900
DIRECTIONS:
(1) Add 21 gms D7l0 Curing Masterbatch per l000 gms 1438.
Mix thoroughly - age at least overnight before use.
(2) OPTIMUM CURE for Catheters: 2 hours @ 210° F - 220° F
for rubber .030" - .040" thick.
(3) At a 2l/l000 level of 00D7l0 Curing Masterbatch and a
rubber thickness of .030"- .040" slight overcure will occur
if a heating cycle of 2 hours at 220-230° F is used.
(4) Good rubber physicals may be obtained - together with a
slower cure rate and a longer tank life if the ratio of D7l0 to
l438 is lowered. Acceptable cures with ratios as low as l6 gms
D7l0 per l000 gms l438 have been reported.
(5) Use soft or distilled water for dilution if necessary.
(6) Suggested cure: l6 hours @ l65° F.
(Catheter balloons-.005"-.008" thickness)
LTX 001405 - Biological
injection
Total solids content % 57 - 58
pH 10 - 11
Viscosity(Brookfield #3@30) cps 240 minimum
Weight per gallon (lbs) 8
USE:
Injection into the veinal and arterial systems of
biological specimens. Pigmented blue for veinal
system and red for arterial system. After coagulation
of 1405 the tissue is disintegrated with acid solution
or caustic potash solution.
PREPARATION:
To one quart of 001405 add 20 grams of 37%
Formaldehyde and inject specimen. Gelation should take
place in about 30 minutes or add 35 grams of Sodium
Silico-Flouride diluted with and equal amount of water.
( Gelling time about 6 minutes. )
PIGMENTATION:
Red 00D521 Add 20-60 grams per quart of 1405 de-
pending on the intensity of color desired.
Blue 00D507 Add 20-60 grams per quart of 1405
Yellow 00D508 Add 20-50 grams per quart of 1405
|
Top of
Page
Natural
Latex
LTX 001400 - Natural Latex
Total solids content (%) 60.6 - 62.6
pH 9.6 - 11.6
Viscosity (Brookfield #2@60) cps 50 - 200
KOH number .65
Mechanical stability (seconds) 250 - 300
Color white
Odor-after neutralization No putrefactive odor
with boric acid
LTX 001700 - Low Ammonia
Centrifuged Natural
Latex
Total solids content % 61.8
K.O.H. number 0.68
Mechanical stability 1500 sec
Viscosity (LVF) 120 cps
Viscosity at 60% TSC 85 cps
Filterability (Gals/Ft²) 15
Ammonia on water 0.47%
Ammonia on latex 0.18%
pH 9.5
Color Light creamy white
Odor Light Ammonia
|
Top of
Page
Pre-Vulcanized
Latex
LTX 01403B - Pre-vulcanized
Natural Latex
Compound
Total solids content % 59 - 61
pH 10.5 - 12.0
Viscosity (Brookfield #2 @ 60) cps 0 - 100
Total alkalinity 0.65 - 0.75
NH³ based upon wet weight
Coagulum content % 0.007
based upon solids
Mechanical stability (seconds) 120 minimum
Color WHITE
Elongation % 800 - 900
Tensile (psi) 4400 - 4800
|
Top of
Page
Slush Casting /
Halloween Masks
LTX 001711 - Pre-vulcanized
Low
Ammonia Casting
Compound
Total solids content % 59 - 62
Ammonia odor NONE
Total alkalinity 0.09 (typical)
(% NH³ on wet wt)
Mechanical stability (minutes) 10 minimum
Viscosity (Brookfield) cps 300 - 600
Weight per gallon (lbs) 8.72
RECOMMENDED USAGE:
001711 is designed for slush casting in plaster of Paris molds.
It is prevulcanized and exhibits good strength, which aids in
mold stripping. This product has been formulated to eliminate
the ammonia odor which normally exists with products of this
type. The absence of ammonia odor makes this product
exceptionally pleasant to work with in the manufacture of
masks and other flexible products.
|
Top of
Page
Solder
Mask
LTX 001452
- Masking Latex
Total solids content % 49 - 51
pH 10 - 11
Viscosity (Brookfield #5@10) cps 27,000 - 31,000
Weight per gallon (lbs) 8.5
Appearance white paste
Odor slight ammoniacal
|
Top of
Page
Strippable
Coating
LTX 001422
Polymer prevulcanized natural latex
Total solids content % 53 - 57
pH 9.5 minimum
Viscosity (Brookfield #3@12) cps 5500 - 6000
Weight per gallon (lbs) 8.3
001422 is a white self curing latex coating for the protection
of various surfaces. Application may be made by spray, brush
or roll. At ambient temperatures, the drying time for 0.010
film is approximately 30 minutes. The time will vary with
the relative humidity. All surfaces to be sprayed with
001422 should be thoroughly cleaned, free from oil, grease
and dirt. Three spray coatings or two roller coatings are
then applied.
Proper care of the spray equipment is a must. After completing
the spray application, the excess latex should be removed
from the spray pot or lines. Then a solution of 5% - 10%
soap solution should be sprayed through the gun, followed
by clear water.
If applied by roller, the roller should be dipped in 5% - 10%
soap solution and vigorously shaken to remove excess water.
Then dip into the 001422 compound and apply. After
completing the application, the roller is then dipped repeatedly
into the soap solution, rinsed with clear water and dried.
|
Top of Page
White
Dispersions
00D549A - 60% Active Rutile
Titanium
Dioxide
Total solids content % 58 - 62
Weight per gallon (lbs) 15.6
Viscosity (Brookfield #2@12) cps 500 - 1200
pH 10 - 12
Dispersion does not contain Casein. D549A is used for
whitening latex.
00D562 - Ball Milled Rutile
Titanium
Dioxide
Active solids % 70
Total solids content % 69 - 71
Viscosity (Brookfield #3@12) cps 1000 - 3000
pH 9 - 11
Weight per gallon (lbs.) 17.78
|
Top of Page
|
Home | Selection Guide | Product Data |
Graft Polymer Products
Contact Us | Request
Information
| Top of
Page
TRCC
Coatings & Adhesives Division
63 Water Street ·
P.O. Box 2760 · Fall River, MA
02722
Tel: 508.675.0181 · Toll
Free: 800.922.0078
Fax: 508.677.0370 · www.trcc.com
|
|
